Free Craft Friday -- Keepsake Pillow

My husband and I first met in person on August 14, 2006.  He work a t-shirt from his favorite band at the time (Lagwagon) and I wore a black shirt with these camoflauge cargo shorts.  We had an amazing first date.  He took me to a restaurant that his family visited every Labor Day weekend.  I joked it was a dive as it was the first time I'd eaten there although I lived much closer to it than he.  We laughed over "stupid ash chicken" they had burnt my orange chicken and went on to enjoy the movie Goonies at the movies in the park in Ogden.  A little over a year later we were married in October 2007.  The t-shirt and shorts were still frequently worn and finally this summer (2012) they both had enough.  His t-shirt had developed holes at the seams and armpits and my shorts finally split down the inseam.  I didn't really want to get rid of either item.  So I asked my husband if he would mind if I turn his favorite t-shirt into a keepsake of our first date.  He agreed and this totally awesome pillow was born.

Keepsake Pillow

Materials:
-significant clothing from dates, special occassions, etc.
-scissors
-pins
-thread and need or sewing machine

Step 1.  Determine the size of pillow you wish to make.  Make sure you have enough material to cover this size.  You could a pillow form but I decided to just use some extra batting/stuffing I had left over from another project.

Step 2.  Piece your project together.  For me this meant measuring my husbands t-shirt to include the image as well as some material for bordering.  I was then able to piece together a back on the pillow with my shorts.  I cut them apart at the seams and tried to use the least worn pieces for the pillow.  I then pinned the back together and sewed this first (really a mesh of different sizes and shapes).  I pieced the back together making sure that it would oversize the t-shirt piece (size of pillow).

Step 3.  Trim down both from and back pieces of material to be the same size.  In my case I trimmed the shorts to be the same size as the t-shirt piece.  I laid out the t-shirt on top of my sewn shorts and then trimmed off the excess.

Step 4.  Pin both pieces with right sides together and sew along the outter edge with a 1/2" seam.  Leave a hole approximately 2 to 3" in order to stuff the pillow.  If you use a pillow form this "hole" will need to large enough to put your pillow in.

Step 5.  Stuff your pillow.  To finish use needle and thread to sew up the opening in the pillow with an invisible stitch.

*I'm sure there are other ways to form a pillow with remnant clothing, etc.  I simply went with the simplest of ways and one that I knew I would have enough material for.   And yes the pictures are crap on this one...serves me right for using my less than desirable camera.

Whip It Up Wednesday: Tusan Pasta With Tomato-Basil Sauce

Like many of my friends I am newly (or not so newly anymore) addicted to Pinterest.  I love to pin recipes that I want to try, home decor that I swear I will use once we're on our own again and crafts that interest me.  But I figure lots of people never even try their pins out...what a waste of time to pin and not use.  My in-laws have recently fallen victim and grateful recipients of my interest to weed out good recipes from the hum-drum stuff.

Tuscan Pasta with Tomato-Basil Cream Sauce (original found here)

1 (20-oz.) package refrigerated four-cheese ravioli* (I used spaghetti or fettucine noodles also)

1 (16-oz.) jar sun-dried tomato Alfredo sauce

2 tablespoons white wine (optional; I put milk in instead)

2 medium-size fresh tomatoes

1/2 cup chopped fresh basil

1/3 cup grated Parmesan cheese

Garnish: fresh basil strips

Preparation:

1. Prepare pasta according to package directions.

2. Meanwhile, pour Alfredo sauce into a medium saucepan. Pour wine into sauce jar; cover tightly, and shake well. Stir wine mixture into saucepan. Stir in chopped tomatoes and 1/2 cup chopped basil, and cook over medium-low heat 5 minutes or until thoroughly heated. Toss with pasta, and top evenly with 1/3 cup grated Parmesan cheese. Garnish, if desired.
*1 (13-oz.) package three-cheese tortellini may be substituted.
**1 (14.5-oz.) can petite diced tomatoes, fully drained, may be substituted.
Note: For testing purposes only, we used Buitoni Four Cheese Ravioli and Classico Sun-dried Tomato Alfredo Pasta Sauce.

My Star Rating: 4.5
** I LOVED this the first time but it was simply just delicious the second...still would make it repeatedly though; my in-laws and husband also raved about it.  Major plus...it is so easy to prepare.

Free Craft Friday: Applique and Disney Outfits

Every leap year my husband's family celebrates their tradition of going to Disneyland together.  I have enjoyed this tradition twice with his family now and I think it's a great way to not overdo Disney and still keep it magical.

For this trip (February 2012...old project haha) I decided to make the girls a Minni Mouse shirt.  I had found some red with white polka dot material in the remnant bin at Hancock Fabrics a few months before and knew I could put it to use for a fun Disney outfit for them.  A couple weeks before the day I found that I hadn't even touched the project so I went to work.  I searched online for a template for Mickey Mouse ears and discovered people wanted to charge me $4 or more.  No thanks.  I hopped on a Google Docs and made a super simple template myself in about 10 minutes. Mickey Mouse Template here (let me know if it doesn't work).

Next I looked up a few different tutorials on doing applique (Plaid Apple and Sew Mama Sew were my go to blogs on this). 

materials needed (polka dot material not present)

Minnie Mouse Onsie / Applique

Materials:

-onsie or shirt

-red and white polka dot material

-black material

-Wonder Under or other fusible interfacing

-stablizer or you can use lightweight interfacing (keeps your stitches from puckering)

-sewing materials (sharp sewing scissors help a lot)

-iron

Step 1. Prewash your fabrics and onsies. I am horrible at this but it's an important step especially with applique and sewing different fabrics together.

Step 2.  Trace and cut your template for applique from the Wonder Under.  Mickey made it easy as I didn't have to reverse the image or such but keep that in mind depending on how complicated you get. Iron on the Wonder Under peice to the wrong side of your fabric.

 Wonder Under cut into pattern and ironed on to "wrong" side of fabric"

Step 3.  Peel off the paper backing of the Wonder Under once your peice has cooled.  This was my first time doing applique and I swear this was not a step in any tutorial and I tried to iron the peice on with the paper attached (silly me). 

peel off the paper leaving the adhesive behind

Step 4.  Iron the sticky side down of your fabric peice to the shirt or item you want it attached to.

Step 5.  Iron on stabilizer or pin it to the inside of your garment.  This will keep the stitching even and prevent ruffle and other uneven looking applique messes. 

Step 6.  Using a sewing machine or by hand, sew around the outside of the applique.  Try to keep your stiches close to the border and very even...overlapping to prevent fray or allowing for fray if you wish, depending on style.

Gathered Skirt (Addition)

After the applique onsie/shirt was complete I used the red and white polka dot material to add a simple gathered skirt to each onsie. Then I simply put a pair of red and black leggings under each girls' outfit and we were good to go. Literally finishing touches (the bows) were added only hours before our flight.

Step 1.  Sew hems on both top and bottom of skirt.  Then sew a long "baste" stitch with your machine along the top of the skirt.  DO NOT reverse stitch or "lock" your baste stitching.

 gather material with a basic sewing machine..."baste stitch" and keep your thread long at both ends

Step 2.  Keep the thread long at both ends of the peice of fabric.  Once you have the baste stitch complete find the bottom/bobin thread (bottom of hem/stitch) and gently pull on this and gather your skirt across. 

pull the bottom thread or threads in this case and voila...cute gathered skirt

Step 3.  Pin the skirt to the shirt or onsie to get your spacing/gathering just right and then sew the back seam together with right sides together.  Once back seam is complete then sew the skirt to the onsie or shirt.  

finished product without the bow

Basing my under $10 estimate on $3 onsie, $2 remnant fabric, $5 Wonder Under (not using nearly all of it) and having some other supplies on hand.

My girls living it up in Disneyland with their Minnie Mouse themed outfits

Free Craft Friday -- Bookmarks

Hello? Miss me?  I have been off in my real life for quite some time.  Also the giveaway never really did anything so I gave up some interest in this blog.  But mostly things were pretty busy and have only started feeling a little more in control.  We had our house on the market, we updated the kitchen, which then had two offers directly after the remodel (apparently an update sells houses quick), so then we packed up and moved out in somewhat of hurry and now we have settled into my in-laws basement temporarily (ie living the dream).  But we are hoping to turn around and find the perfect home and location soon.
So anyway as luck would have it as we were packing up I found an old craft that I did a number of years ago.  I decided to bring this project with me to our new digs to give myself something to do.  Basically this craft is using embroidery thread to make bookmarks.

 Materials:
embroidery thread (I usually use between 4-6 strands of coordinating colors)
beads (small, medium, large and decorative)
scissors
clamp/clothes pin (optional)

Step 1:  Decide on a color scheme and general look you want for the bookmark.  I like to add heavier beads to dangle off the ends.  Use small beads or no beads for the part of the bookmark that will go inside the book.

Step 2:  If you use a long piece you can start a knot at the length of "dangle you want on the first end.  Then just let creativity flow...add beads, charms, decorative knotting and braiding, etc to make your bookmark end.

Step 3:  Once you have one end of your bookmark done, work through the middle.  I usually only braid or use very small bead with this part.  It will only be seen by the reader, it allows the book to close easily and also you don't want to damage the book pages with large beads.  When you finish the length you need for the book tie a knot leaving yourself room to add another "tail" to the book mark.

Step 4:  Similar to Step 1 work beads and charms onto the tail end of the bookmark.  I like to knot between each section or theme of beading to keep things more separate and pleasing to my eye.  Make sure to knot the ends of each tail securely.  I also recommend using super glue to keep it from coming loose.

Step 5:  Place in a book for decoration, use this with your reading or give as a gift.  Who knows maybe this craft will become obsolete if Kindles and tablets keep taking over the world of book.

New Kitchen, New Life

We recently decided to "remodel" our kitchen.  I say remodel in quotations because we didn't do anything extensive but it did give it a whole new look.  We have been trying to sell our home for a couple months and one of the few feedback we recieved was about the kitchen and oak cabinets looking dated.  I never minded them but after another month of no offers I decided it was time to make a change.  I wanted to paint them white or cream (I didn't think staining would do much to change the oak grain, etc).  A friend mentioned that she liked a style she saw on Pinterest and it would be simple enough to do.  It looked nice.  It looked modern.  So within a week of serious thought over it the plans went into action.

* hoping to add a few tutorial notes on how to do this for anyone interested but shame on me I didn't take pictures *

 Before

 After

 Close up (beadboard inserted and then painted)

 Close up #2

Close up #3 (I love the cup handles on these)

It took a little longer than I anticipated and although fate stepped in and we had about a week or so with no showings (first one since we listed) it wasn't quite enough to finish up.  Many steps and lots of time for paint to dry.  But we did have a few showings with it in the middle of completion and apparently it didn't scare them all off as one person came back for a second look.  I credit the new kitchen and Jeff is happy to agree with my hard work.  It certainly brings new life and light to our kitchen and hopefully it will help us sell and bring us a new life/direction too. 

--Update-- After this kitchen project was complete we received an offer from each of our next two showings and were able to decline the first and lesser of the two and go with the better offer and sell.  

Steps / Tutorial on the kitchen

Materials:

- bead board (purchased this at home depot in 4' x 8' panels; it is thin ~ 1/4  inch or less)

- clamps

- liquid nails 

- standard paintable caulk 

- caulk gun

- Krud Kutter or other surface cleaner

- primer and paint (we used Kilz Primer basic and Valspar Kitchen and Bath Enamel ; ask a paint   

  professional if you are concerned with products working together or for this type of project -- we weren't    very concerned with this as it was a "remodel" to help sell our home)

- table saw (highly recommended) or other power saw

- spray paint (optional) - we were going to replace all of our hardware but when hinges ended up being $5 a piece I opted to spray paint based off of a tutorial I had seen

- finishing nails and hammer (DO NOT use on cabinets...we used this to fix the bead board under our snack bar in place after applying the liquid nails).

Step 1 :  Measure all of your surfaces that you plan to add bead board to.  We added it under the snack bar and to the inner panel of each cabinet door.  

Step 2:  Using a table saw (my personal preference...thanks to my brother for helping with this part), cut your pieces of bead board.  It is better to go a little smaller (right on top or inside of your line) than to end up with a piece that doesn't fit in where it should. 

Step 3:  Prepare your cabinets.  Take all of the cabinet doors down and hardware (hinges, handles) off.  Clean with Krud Kutter (this is what most tutorials recommend and it is awesome) and then sand any place that will be painted.  You don't need to sand under the bead board sections.  Wipe down everything with a clean rag after you have sanded. 

Step 4:  Using liquid nails glue down your bead board into each cabinet door.  Then clamp the bead board down while it sets and dries.  We also used books to apply equal pressure.  If you don't have enough clamps for all cabinets then do this in steps.  I don't recommend just using weight to keep the bead board down as it will likely bow up in places (we tried this).  

Step 5:  Once the liquid nails is dry and completely set, then use a caulk gun to run a bead of calk along any gap that may be left with the bead board panel.  Then dip your finger in water and smooth the bead out across the surface.  If you get caulk into the grooves of the bead board I recommend q-tips to clean this out.

Step 6:  While waiting for liquid nails to dry and caulk to dry (I gave each 24 hours) this is a great time to prime and paint the cabinets that are on the wall.  Make sure to tape everything off beforehand.

Step 7:  Smooth out and sand any caulk that is raised above the pattern or layout of your cabinet doors.  Once you are satisfied with the appearance of the doors then it is time to prime and paint those also.  

Step 8:  Either buy new hardware (I like this idea as your hardware is probably outdated and you want a "new" kitchen wow factor) or put your hardware back up and replace the cabinet doors and drawers (once they have had a good amount of time to dry of course).

Step 9:  Enjoy, brag and sell that house (in our case...I think the kitchen was a big selling point once we finished it; two offers from the two showings that happened after it was finished said a lot to me). 

* once again sorry that there aren't pictures but hopefully you can put the pieces together.  If there are questions don't be afraid to leave a comment.  Thanks *

Whip It Up Wednesday -- Banana Zucchini Bread

I love banana bread and I love zucchini bread.  I had purchased bananas for my girls and then some zucchini to make bread.  Seeing as how the bananas were becoming overripe and I still hadn't made my zucchini bread I decided to combine the two.  So here is my first minor experiment in recipe adjusting.

Banana Zucchini Bread

1/2 C shortening

1 C sugar

2 eggs

2 ripe bananas

1 small to medium zucchini grated

1 C all purpose white flour

1 C wheat flour

1 tsp baking soda

1/2 tsp cinnamon

1/2 tsp vanilla extract

1/2 tsp salt

1/2 C nuts (optional)

Cream shortening, sugar, eggs, bananas, grated zucchini and vanilla together.  Sift in flour, soda, cinnamon and salt.  Blend all of your ingredients together, mixing in nuts at the end if you desire.  Pour batter evenly into  two greased/floured loaf pans.  Bake for 45 minutes at 350* F.  If making muffins cook at 350* for 35 minutes. 

Notes:  You can do this recipe with three bananas instead of the zucchini.  My original recipe called for 2 cups white flour but I have become of fan of putting in at least half wheat flour.  I also decided to add some cinnamon.  My loafs both stuck to the pan using spray so I would recommend the grease and flour method for this one.

Rating:  5 stars 

-I really enjoyed this one.  It was easy to throw together and cook despite the disaster in my kitchen (more on that later).  I like the mixture of flavors.  Also my girls definitely enjoyed this bread and were begging for more (you know the open mouth and "ah ah ah" type begging). 

Giveaway Begins...

I've decided that although this Giveaway is not the ideal of what I wanted to do that it's about time that I fulfill on my promise.  So I will be starting the clock on our first giveaway today.  The process I will be following is this.

-Every follower of this blog will be entered to win
-If you comment on this post you will get an additional entry
-I will posting about the giveaway on our Facebook page...if you like this Facebook post you will get an additional entry
-Anyone you refer to the blog or Facebook page will also earn you an additional entry
-Entries will end on March 24, 2012 at midnight (MST).  Drawing winner(s) will be announced on March 26th.

I will make a list of those who have been entered and assign numbers down the list and then use a random number selector to chose a winner.  The winner will be announced on Facebook and the blog and will then email me with their choice of items below and their address.

Giveaway choices:
-seat belt cover (a pair for infant car seat or one for adult seat belt)
-tiered plate (the green plate set or the hardware to make your own w/ plates not included)
-your choice of three hair accessories (felt or silk)
-fabric ball

So follow, like, refer and win something super great for yourself or someone you love.